Flexure Testing Machine Manufacturers Bhutan

What is the Flexura Testing Machine and how is it performed?

Flexura Testing Machine or flexural strength testing is often used to fix the flexural strength or flexural modulus of materials. Flexure tests are less costly than tensile testing, and their results are also considerably different. The material is positioned across two points of contact (lower support span) horizontally, and then a force use to be applied to the top of the material through one or two points of contact (upper loading span), repeating the operation until the sample fails. The greatest force recorded represents the sample’s flexural strength. Read more details on Flexure Testing Machine Suppliers in Bhutan.

Therefore, what is the aim of the Flexure Test?

The most usual purpose of a flexure test happens to be measuring the flexural strength and modulus of elasticity. Flexural strength is demarcated on either the compression or tension side of the specimen as the extreme stress given to the outermost fibre at that location. The slope of the stress vs. strain deflection curve is used to calculate a structure’s flexural modulus. These two values may be used to measure a sample material’s ability to withstand flexure or bending forces, respectively.

How does a Flexural Test Machine work?

Flexure Testing Machine are often universal testing devices designed to evaluate the ductility, bend fracture strength, strength, and resistance to fracture of a range of materials and material combinations. Bend tests by Flexure Testing Machine Exporters in Bhutan, are often used to fix the metal products and ductility of metals. Bend test equipment as well as techniques are fairly similar to those used for flexure tests. Flexure tests happen to be often used to evaluate the brittle properties of materials such as plastics, polymers, composites, glass, and ceramics. In the testing industry, the terms “bend test” and “flexure test” are interchangeable.

If feasible, flexural testing should be performed on universal testing equipment equipped with bend fixtures and closed loop controllers provided by Flexure Testing Machine Manufacturers in Bhutan. The testing equipment should be capable of loading at a controlled, uniform pace, enabling the load to be given in a continuous motion during the test. Unless otherwise indicated, force and displacement transducers should have an accuracy of +/- 1% of the reported value. Bend fixtures may be three- or four-point bend fixtures, depending on the location of the stress applied to the specimen during the test.